5
Advanced high-strength structural hollow sections

Strenx Tube 700MH

Advanced high-strength structural hollow sections

Strenx Tube 700MH is an HF-welded cold-formed structural hollow section made of hot-rolled high-strength steel with a minimum yield strength of 700 MPa.

Its high strength combined with naturally stiff form of welded hollow section enables construction of stronger and lighter structures. Strenx Tube 700MH meets or exceeds the requirements of prEN 10219 (2016) and it is CE marked according to EN 1090-2. Typical applications include load-bearing structures in the lifting, handling and transportation segments.

Strenx Tube 700MH is available in circular, square and rectangular shapes. Other shapes and sizes are available upon request.

The maximum length of the tubes is 12-18 meters, depending on the size. Longer or cut-to-length tubes are available upon request.

Hot dip galvanizing Strenx Tube 700MH hollow sections may lead to cracking. Please consult SSAB Tech Support prior galvanization.

Dimensionsintervall

Strenx Tube 700MH kan fås i cirkulär, kvadratisk eller rektangulär form. 

Cikulärt 33.7 - 323.9 mm
Fyrkantigt 30x30 - 300x300 mm
Rektangulärt 50x30 - 400x200 mm
Väggtjocklek 3.0 - 10.0 mm
Fabrikslängd 6000 - 12 000/18 000 mm

Andra former och storlekar finns på begäran.

Tillgängliga standarder

EN 10219-2

EN 1090-2

Välj form för att visa egenskaper